Clean everything up from excess transmission fluid and reassemble in the reverse order to get everything back to working order. Use a little transmission fluid to lubricate the replacement solenoid and o-ring before pressing it back into place. Unplug the solenoid from its connector, and remove the bad solenoid from the transmission. Pay close attention so as not to damage any wiring harnesses or connectors. Remove the transmission filter and the transmission’s valve body, which contains the shift solenoids. Place a drain pan underneath the transmission’s oil pan, and remove the bolts on the transmission fluid compartment and use the oil pan to catch the fluid. If your vehicle has a longitudinally mounted engine (the front of the engine facing the front of the engine compartment), the automatic transmission will be mounted behind to the engine closer to the center of the vehicle. If your vehicle has a transversely mounted engine (the front of the engine facing the side of the engine compartment), the automatic transmission will be mounted next to the engine. Once raised (with jack stands and wheel chocks in place), locate and remove the transmission oil pan. Once the shift solenoid has been diagnosed as the cause of your transmission’s shifting issues, you must be able to comfortably access the underside of the transmission, which could require using a jack on vehicles that sit lower. Based on inputs from the driver and other vehicle computers, the TCU can modfity shift points to maximize fuel economy, performance, and comfort. These valves regulate the flow of transmission fluid throughout your transmission system based on electrical signals from the transmission control unit (TCU). What Is Solenoid Replacement?Īutomatic transmissions are equipped with internal shift solenoids that are electro-hydraulic valves. If you’re unsure of your needs, consult your owner’s manual or local parts store. If you plan to perform this task as a DIY, make sure you purchase the correct parts for your specific vehicle. Keep in mind: Many vehicle components are specifically designed for certain makes and models. You can save hundreds of dollars by performing this project as a DIY. Cost to DIY: $75-$100Īlthough opening up an automatic transmission might seem like a daunting task, replacing the shift solenoids is actually not that difficult of a job. Depending on the transmission, there are two or more shift solenoids, and if yo’re having shifting problems caused by a faulty solenoid, you should replace all of them at the same time. Although the parts are relatively inexpensive, the process of getting to the solenoid is challenging, which increases the labor cost. Replacing the shift solenoids inside an automatic transmission will take approximately two to four hours for a trained professional. Get a more accurate estimate for your solenoid replacement using RepairPal’s Fair Price Estimator: Cost at the Mechanic: $75-$450 For a more accurate estimate specific to your vehicle’s make, model, and mileage, visit the RepairPal Fair Price Estimator. Related repairs or maintenance are also not included in this estimate. The average cost price range is based on the national average for all vehicles, not factoring in fees, taxes, make, or model. The Average Cost for Automatic Transmission Solenoind Replacement Is $75 to $450, Depending on if You Go to the Mechanic or DIY.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |